emg_logo

click-here-to-call

all chimney work
Oil to Gas Dual Fuel Conversions

New External Stacks

There are chimneys which run up the wall of the building. Either the original chimney is too damaged to use, line or repair so an external stack is installed as a replacement. Support guides and brackets mount into the masonry of the building exterior to secure the stack in place.

Typically this is a double wall insulated stainless steel stack. The reason for the insulation is so the external portion of the chimney is not hot to the touch. Scaffolding is typically needed to access the entire run of the building for the install. In many cases we are replacing and existing stack and in that case depending upon the setup at your building we may be able to install the
new stack before removing the old. This is a bonus for the building because the tenants will not be affected and the building will have no issue with heat during the installation.

Get a Free Quote




Video Scans

A video scan allows us to see the interior portion of the chimney cavity that we cannot view from a Level 1 inspection.

Smoke Tests

Even better or more conclusive then the video scan to determine the tightness and condition of your chimney is the smoke/pressure test.

Acid Testing for Brick

The objective of this test is to determine if the brick inside the chimney is acid or firebrick and will withstand…

Chimney Extension

A chimney is built during the construction process of a building. Since there is often changes and constant building additions…

Oil to Gas Conversions

We line the interior of your existing masonry chimney structure.

Chimney Liners

We line the interior of your existing masonry chimney cavity from top to bottom.

Cogen Pipe Installation

Content awaiting…

Breeching Work Replacement

Content awaiting…

New External Stacks

There are chimneys which run up the wall of the building. Either the original chimney is too damaged to use,…

Contact Information

Emg Industrial Chimney
230 Patton Ave
West Babylon, NY 11704

Phone: 646-798-2811

Email: info@emgindustrial.com